Refer to [1] and [2], add nativesdk-libdevmapper PREFERRED_RPROVIDER to
fix [build-deps] QA warning when building nativesdk-cryptsetup.
Fixes:
NOTE: Multiple providers are available for runtime nativesdk-libdevmapper (nativesdk-libdevmapper, nativesdk-lvm2)
Consider defining a PREFERRED_RPROVIDER entry to match nativesdk-libdevmapper
WARNING: nativesdk-cryptsetup-2.7.0-r0 do_package_qa: QA Issue:
nativesdk-cryptsetup rdepends on nativesdk-libdevmapper, but it isn't a
build dependency? [build-deps]
[1] https://git.openembedded.org/meta-openembedded/commit/?id=3f64779eae2d8312f569bee863f90ec4f8176e6c
[2] https://git.openembedded.org/meta-openembedded/commit/?id=1e848281ef6ff53bb89e323a978ebd00f02cb1f2
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
[Python Misc] Revert change to print backtrace in server
[PSM Interop] Use the Kokoro shared install lib from the new repo
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
rebase patch 0001-configure.ac-check-for-CPP-prog.patch for iperf3.16
Changelog:
===========
Multiple test streams started with -P/--parallel will now be
serviced by different threads. This allows iperf3 to take
advantage of multiple CPU cores on modern processors, and will
generally result in significant throughput increases (PR #1591).
OpenSSL 3 is now detected at build time. If OpenSSL 3 is found,
various older, deprecated, APIs will not be used. iperf3 will
continue to work with OpenSSL 1.1.1. OpenSSL is used as a part
of the iperf3 authentication functionality (Issue #1300, PR#1589).
The authorized users file used by the authentication functionality
is now checked for accessibility much earlier during the program
startup, as opposed to being checked near the start of a test (Issue #1583, PR #1585).
Iperf3 now requires pthreads and C atomic variables to compile and run.
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
it checks for strace and then try fault injection if it exists. So,
while it will be good to have strace port for rv32 it can be disabled
for now
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Place reproducible build date in source files instead of
actual build date if SOURCE_DATE_EPOCH available.
Signed-off-by: Oleh Matiusha <omatiush@cisco.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* it uses gdbus-codegen from glib-2.0-native which depended
on python3-distutils-native until
https://lists.openembedded.org/g/openembedded-core/message/196136
but distutils on host was enforced by sanity check only until mickledore with:
https://git.openembedded.org/openembedded-core/commit/?id=8e3a5b0709384f2b455a82ac1e8e212686fe4456
so on hosts without distutils this was already failing with:
http://errors.yoctoproject.org/Errors/Details/754696/
cd TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/build/dbus && gdbus-codegen --pragma-once --interface-prefix org.bluez.Descriptor1. --generate-c-code TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/build/dbus/org-bluez-gattdescriptor1 TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/git/dbus/dbus-bluez-v5.48/org.bluez.GattDescriptor1.xml
Traceback (most recent call last):
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/bin/gdbus-codegen", line 53, in <module>
from codegen import codegen_main
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/share/glib-2.0/codegen/codegen_main.py", line 29, in <module>
from . import dbustypes
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/share/glib-2.0/codegen/dbustypes.py", line 22, in <module>
from . import utils
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/share/glib-2.0/codegen/utils.py", line 22, in <module>
import distutils.version
ModuleNotFoundError: No module named 'distutils'
and the glib-2.0-native change only changes the dependency from
distutils to packaging which results in:
http://errors.yoctoproject.org/Errors/Details/754692/
FAILED: dbus/org-bluez-gattdescriptor1.c TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/build/dbus/org-bluez-gattdescriptor1.c
cd TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/build/dbus && gdbus-codegen --pragma-once --interface-prefix org.bluez.Descriptor1. --generate-c-code TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/build/dbus/org-bluez-gattdescriptor1 TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/git/dbus/dbus-bluez-v5.48/org.bluez.GattDescriptor1.xml
Traceback (most recent call last):
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/bin/gdbus-codegen", line 53, in <module>
from codegen import codegen_main
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/share/glib-2.0/codegen/codegen_main.py", line 29, in <module>
from . import dbustypes
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/share/glib-2.0/codegen/dbustypes.py", line 22, in <module>
from . import utils
File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/gattlib/0.2+git/recipe-sysroot-native/usr/share/glib-2.0/codegen/utils.py", line 22, in <module>
import packaging.version
ModuleNotFoundError: No module named 'packaging'
* packaging probably isn't as wide spread on host distros as old
distutils was, so make sure it's available by using
python3-native with python3-packaging-native from OE build
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
As the change [1] introduced in 10.11.7, there comes below configure failure:
| -- Performing Test HAVE_SYSTEM_LIBFMT
| CMake Error: try_run() invoked in cross-compiling mode, please set the following cache variables appropriately:
| HAVE_SYSTEM_LIBFMT_EXITCODE (advanced)
| For details see /build/tmp-glibc/work/core2-64-wrs-linux/mariadb/10.11.7/build/TryRunResults.cmake
| -- Performing Test HAVE_SYSTEM_LIBFMT - Failed
[snip]
Considering [1] is mainly used to test fmt 10.0.0 failure and we use libfmt
10.2.1 now, so define "-DHAVE_SYSTEM_LIBFMT_EXITCODE=0" as workaround [2] to
fix the above configure error.
Remove the problematic assert lines to fix the below build failure on 32bit
arm as the next 10.11 release will bring the assert back in a way that works
on 32-bit arm [3].
In file included from TOPDIR/build/tmp/work/cortexa15t2hf-neon-yoe-linux-gnueabi/mariadb/10.11.7/mariadb-10.11.7/tests/mysql_client_test.c:38:
TOPDIR/build/tmp/work/cortexa15t2hf-neon-yoe-linux-gnueabi/mariadb/10.11.7/mariadb-10.11.7/tests/mysql_client_fw.c:1438:3: error: 'compile_time_assert' declared as an array with a negative size
1438 | compile_time_assert(sizeof(MYSQL) == 77*sizeof(void*)+656);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1] b5c367cd88
[2] https://jira.mariadb.org/browse/MDEV-30694
[3] https://jira.mariadb.org/browse/MDEV-33429
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
ChangeLog:
https://github.com/linux-audit/audit-userspace/releases/tag/v4.0
Major changes:
Separate loading rules and logging events into separate services,
audit-rules.service and auditd.service.
Drop support for python2 and SysVinit.
The auvirt and autrace programs have been dropped.
The syscall and interpretation tables have been updated for the 6.8
kernel.
* Backport patch to fix build error with musl
* Clean up configure options
* Use its own systemd service files
* Refresh patches
* Fix indentation
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The function signing_import_pubkey_from_pem is defined twice, one of
them should really be named signing_import_pubkey_from_der. Fix this and
while at it fix some argument names in the comments above the functions
as well.
Reported-by: Miklos Toth <Miklos.Toth@knorr-bremse.com>
Fixes: 4a6ac691f ("add signing.bbclass as infrastructure for build artifact signing")
Signed-off-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
In oe-core, PTESTS_PROBLEMS are also enabled, so even though
the recipe might have failures or the ptests do not run cleanly,
the BBCLASSEXTEND still works.
Enable the same behavior for meta-oe.
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The build process currently succeeds but the odbc.pc file is not correctly
generated.
The error message is like below in log.do_compile and log.do_install:
/bin/bash: line 1: ../exe/odbc_config: cannot execute binary file: Exec format error
I can see the message comes from the following line in exe/Makefile.am:
@sed "s![@]ODBC_ULEN[@]!`$(top_builddir)/exe/odbc_config$(EXEEXT) --ulen`!" \
$(top_builddir)/DriverManager/odbc.pc > $(top_builddir)/exe/odbc.pc.tmp
It's running the exe/odbc_config program we built out. But the binary is for the target
platform and if we run it on the build host, we get that error message. The resulting ulen
and build_cflags in the final odbc.pc file are also empty.
Fix the issue by using qemu usermode to launch the target binary.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Backport a patch to fix the compile problems seen on 32bit x86
Fixes
TOPDIR/build/tmp/work/core2-32-yoe-linux/webkitgtk3/2.42.5/webkitgtk-2.42.5/Source/JavaScriptCore/llint/LowLevelInterpreter.cpp:339:21: error: use of undeclared identifier 't6'
339 | UNUSED_VARIABLE(t6);
| ^
TOPDIR/build/tmp/work/core2-32-yoe-linux/webkitgtk3/2.42.5/webkitgtk-2.42.5/Source/JavaScriptCore/llint/LowLevelInterpreter.cpp:340:21: error: use of undeclared identifier 't7'
340 | UNUSED_VARIABLE(t7);
| ^
2 errors generated.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
============
- The use of 'throw' specifiers is now deprecated and will be removed in SIP
v7. Instead of 'throw()', 'noexcept' should be used. Other forms of
'throw' are no longer required.
- Support for ABI v13.0 and ABI v12.8 and older is now deprecated and will be
removed in SIP v7.
- Documentation fixes.
- Bug fixes.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
* [REM-2981] Move ssh-unrelated code outside of HAVE_LIBSSH ifdef
* [REM-2974] only attempt to resolve hostname if initial ssh_connect fails
* [REM-2980] Remove flag that prevented remote audio from working with flatpak version of Remmina
* [REM-2982] Update Flatpak to use GNOME runtime version 44
* initial port to core22
* [REM-2984] Add null check to prevent freeze when opening an rdp connection
* Fix GTK critical error when editing RDP profile
* Remove snap installs for broken link executables
* SSH private key auth: If username is empty, prompt user to enter it
* Fix Flatpak freeze on connection when importing RDP profile
* Fix of some grammatic issues in German translation
* [REM-3003] Re-add line removed by accident in !2532
* GtkFileChooserNative support
* Spice UNIX socket channel initialization enhancement
* Fix segfault for 'remmina -p'
* Add unlocking code to let plugins use passwords
* CI Pipeline Updates
* [freerdp] update to build for stable-3.0
* Allow Remmina to be built without FreeRDP
* [REM-3048] Fix crash on multi-monitor with FreeRDP3
* Added developer_name to meet new flathub requirements
* [New features] Bring back remmina server features with new additions
* [REM-2983] compile ssh with gcrypt for flatpak builds. Also sync flatpak...
* Update copyright info
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
=========
- Fix webkit_web_context_allow_tls_certificate_for_host to handle IPv6 URIs produced by SoupURI.
- Ignore stops with offset zero before last one when rendering gradients with cairo.
- Write bwrapinfo.json to disk for xdg-desktop-portal.
- Fix gamepads detection by correctly handling focused window in GTK4.
- Fix several crashes and rendering issues.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
Remove use of mach_absolute_time
[ObjC] Use a local to avoid warnings in 32bit builds.
Bump python version to 3.9 for gcloud 460.0.0
Update Ruby GHA to test against Ruby 3.3.
Pin bundler version to 2.4.22 for Ruby 2.7 support.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
python2 is long unsupported, so we no longer need this variable
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
-prepare-root: Unify root.transient with composefs
-libostree: write selinux xattr when on non-selinux systems
-ostree.repo-config(5): Fix a typo
-Expose MOUNT_ATTR_IDMAP detection result to C code
-docs/atomic-rollbacks: Add a section on rollbacks
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
* Allow building as a static library
* ManetteMappingManager:
- Strip leading and trailing spaces from mappings
* ManetteMonitor
- Always use file backend in Flatpak
- Skip non-evdev devices
- Fix object construction
* Various cleanups
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
-Add support for riscv64
-workflows: Update to use actions/checkout
-Fix checksum failure with small isos
-test: Update testing to include small iso and larger iso
-Add a GitHub Action to run tests
-Add mips64
-testpyisomd5sum.py: Support genisoimage, Python 2
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
=========
-fix: Can't detect librocm 6.0.x
-GPU: Added support for dynamic loading of ROCm v6 libraries
-Increase max network interface name to 15
-Fix OpenBSD UTF-8 locale detection
-Add hot-reloading of config file with CTRL+R or SIGUSR2 signal
-Add battery power draw for linux and freebsd
-Fix crash caused by string exception when cpu clock is exactly between 999.5 and 999.9 Mhz
-Write newline at end of config file
-Add theme based on Everforest Dark Medium palette
-fix: don't mangle memory for zombie processes
-Share common code from collect
-Fixed incorrect used and available memory for OSX
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
ver 2.14:
Fix issue with accepting PTK 4/4 after receiving PTK 2/4.
Fix issue with frequency limit for quick scans.
Fix issue with limiting DHCPv4 attempts.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The influxdb group is used by the influxdb recipe and created by default
by the useradd command.
Also, align static passwd file to the USERADD_PARAM in the influxdb
recipe and add the missing newline at end of file.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
E.g. if we want to build uuu statically, libtinyxml2 static library is
missing as it builds only the shared library by default.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
On start the usbgx service configures the usb gadget. However if
one stops the service nothing is done, a subsequent start then
tries to configure the gadget again and fails. `systemctl restart`
is implemented by doing a stop followed by a start and thus is
also affected.
Doing a start/stop/start results with the following reported in
status:
| systemd[1]: Starting Load USB gadget schemas...
| gadget-start[801]: usbg_create_gadget() duplicate gadget name
| gadget-start[801]:
| gadget-start[801]: Error on import gadget
| gadget-start[801]: Error: USBG_ERROR_EXIST : Already exist
| gadget-start[812]: ls: write error: Device or resource busy
The run-postinsts service does execute a restart for each package
which uses the systemd class which creates a race condition that the
usbgx service is already started when run-postinsts restarts usbgx
and creates the above error output.
Fix that by unconfiguring the usb gadget on stop.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The changes include:
- Change to use meson buildsystem.
- Fix build issues in OE.
- Move patches from files to plymouth subdirectory.
- Make themes build/installation optional, since a user might not want
all themes to be installed to rootfs, now he can set PLYMOUTH_THEMES
to chose the themes.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Resolves an issue where python3 package generation was failing to configure.
-- Cannot probe for Python/Numpy support (because we are cross-compiling OpenCV)
-- If you want to enable Python/Numpy support, set the following variables:
-- PYTHON2_INCLUDE_PATH
-- PYTHON2_LIBRARIES (optional on Unix-like systems)
-- PYTHON2_NUMPY_INCLUDE_DIRS
-- PYTHON3_INCLUDE_PATH
-- PYTHON3_LIBRARIES (optional on Unix-like systems)
-- PYTHON3_NUMPY_INCLUDE_DIRS
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
"openssl rsa" works with RSA keys only. Use "openssl pkey" instead which
is a frontend that picks the right operation automatically and works
with RSA keys, eliptic curve keys and also DSA keys.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
