overlay_map.dtb arranges that when config.txt requests "vc4-kms-v3d"
the rpi4 will actually load "vc4-kms-v3d-pi4" and fixups like that.
It is present on the official distros, and must be put into the
overlays subdirectory in the boot partition.
For a detailed description of the overlay_map.dts file see:
https://www.raspberrypi.org/documentation/configuration/device-tree.md#part2.2.10
vc4-kms-v3d-pi4 is required for the arm based kms driver on the rpi4.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
(cherry picked from commit fdf02accfe3f68d11fa178d72eb377f9ca96411c)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
In theory, this would allow one to use the official 7-inch touchscreen
in combination with the (non-firmware) kms driver by adding the
following lines to config.txt:
ignore_lcd=1
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
(cherry picked from commit 68976061c5c130ce68430a59c23afb8044975d41)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
add overlays for pi zero, bcm2710 based rpi2 and rpi b rev 1
Change-type: patch
Signed-off-by: Aaron Shaw <aaron@balena.io>
(cherry picked from commit 509ff8c73229bf483c67299ae12f7b352e348b81)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
reorder list to be in alphabetical order
Change-type: patch
Signed-off-by: Aaron Shaw <aaron@balena.io>
(cherry picked from commit 1c6673262729f60035b6d34b1fa11fc5cbf64710)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
To allow other layers to easily provide a default kernel preference to
use with the Raspberry Pi MACHINEs, switch to use the ??= assignment
operator for setting the default kernel and the device tree value in
this layer.
This change is motivated by enabling Xen support in meta-virtualization
to use the raspberrypi4-64 MACHINE definition from this layer with the
Yocto Linux kernels.
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
(cherry picked from commit e0b4b8c5df410040e8cef7fbe257f1b9c1513355)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
The name `bootfiles` is too generic, we should use `rpi-bootfiles`
instead.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
(cherry picked from commit ba3a417fbbccb5f6af9ac036eac97c87dcf4c1b7)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Added imx219.dtbo file in the overlays, and added dtoverlay in
/boot/config.txt define based.
To enable Sony Raspberry pi camera imx219 sensor, need to set
the variable RASPBERRYPI_CAMERA_V2 as 1.
In future, we can add any camera overlays here to support and
use them with libcamera.
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
(cherry picked from commit b70c7b9021e37ec765f4db9aac0e0e76f617cbac)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
rpi kernel spits out additional errors in kernel logs which should be
ignored, there is no easy way to extend parselogs testcase other than
inheriting it into another testcase and use that testcase instead
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
The device tree only supports a single CAN interface. This prevents
compatiblity with dual-CAN boards like the PiCAN2 Duo.
The mcp2515-can1 device tree blob for overlay was added to RPI_KERNEL_DEVICETREE_OVERLAYS in order to support dual-CAN hats.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
As per the example in the bsp-guide, and the qemu and other machine
configs. Assists when running virtualized, where serial console
device can differ.
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
Add kernel modules gpio-ir and gpio-ir-tx to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1.
Variable ENABLE_IR enables infrared support (for LIRC). This
change affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to
support peripherals for sending and receiving infrared signals.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add kernel modules i2c-dev and i2c-bcm2708 to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1.
This affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add kernel modules, including i2c-dev and i2c-bcm2708, to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will
be present in all images based on packagegroup-core-boot,
including the core-image-minimal image.
Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS
they will be added only in images based on packagegroup-base,
which does not include the core-image-minimal or
core-image-full-cmdline images.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed
to miniuart-bt in 2014, now with 5.4 these are not recognised anymore
and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add u-boot-default-script to the PROVIDES variable to make easier to
replace boot script in another layer just by changing
PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as
the default provider for meta-raspberrypi.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
This change moves the default image for all rpi machines.
We moved from rpi-sdimg to wic.bz2.
Also enable wic.bmap image generation.
From the documentation in [1], Bmaptool is a generic tool
for creating the block map (bmap) for a file and copying
files using the block map. The idea is that large files,
like raw system image files, can be copied or flashed a
lot faster and more reliably with bmaptool than with
traditional tools, like "dd" or "cp".
Example:
$: sudo bmaptool copy <image-name>.wic.xz /dev/<your-block-device>
[1] - https://github.com/intel/bmap-tools
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Since we enabled vc4graphics by default[1], there is no easy way to disable
it if needed. This patch introduces a variable (DISABLE_VC4GRAPHICS)
which when set to '1' will not add 'vc4graphics' to MACHINE_FEATURES
forcing the old behaviour.
One could use it in 'local.conf' for example.
[1] https://github.com/agherzan/meta-raspberrypi/pull/417
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Vc4graphics enables drm backend on wayland Compositor (weston & westeros)
Appending vc4graphics machine feature to use mesa drivers for OpenGL and
V4l2 for video.
Signed-off-by: Riyaz <Riyaz.l@ltts.com>
This change is following the rename in the kernel:
commit 6f91b5dbfdb62a434571a73f2dc15181963e3bea
Author: Phil Elwell <phil@raspberrypi.org>
Date: Tue May 28 16:36:04 2019 +0100
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
This is helpful for example in the cases where the kernel doesn't
provide all the dtbs in arm64 as in arm.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
[Issue #285] -- https://github.com/agherzan/meta-raspberrypi/issues/285
The openembedded-core commit 1860d9d3c62e2e94cd68a809385873ffd8270b6d
changed the names of DTB files in the deploy directory - they are no
longer prefixed with "${KERNEL_IMAGETYPE}-". Update make_dtb_boot_files
(which generates entries in IMAGE_BOOT_FILES) to take this change into
account.
Signed-off-by: Jonathan Haigh <jonathan.haigh@arm.com>
This along with some module and connman magic allows a RaspberryPi Zero
Wireless to tether to a host over USB.
dtoverlay=dwc2,dr_mode=peripheral
modprobe g_ether
connman enable gadget
connman tether gadget on
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
While wic is not a standard image, adding it to IMAGE_FSTYPES in
local.conf will fail unless a WKS_FILE is provided.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The dependency resolution code in bitbake has recently been optimized and this
seems to have slightly changed the behaviour of do_image_rpi_sdimg and
do_image_wic. We ensure that the main build artifacts are present by depending
on the relevant do_deploy and do_populate_sysroot tasks. However, we need to
ensure that other build tasks for these dependencies have also been executed
before we try to create our image. This can be achieved by adding a recursive
dependency on do_build, so that the do_build tasks of all recipes in the
dependency chain of do_image_rpi_sdimg/do_image_wic are executed before the
image function itself is executed.
The original issue seen here was that 'recipedata' files were not copied to
'tmp/deploy/licenses' as do_populate_lic for each dependency had not been ran
before the image creation function. The write_deploy_manifest function from
license.bbclass (listed in IMAGE_POSTPROCESS_COMMAND) therefore failed. Adding
the recursive dependency on do_build fixes this issue, ensuring do_populate_lic
runs before do_image_rpi_sdimg/do_image_wic.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The kernel class is now using $KERNEL_PACKAGE_NAME to set the default
kernel package name in order to allow alternate kernel flavors.
This fixes the following bitbake warning:
Variable key RDEPENDS_${KERNEL_PACKAGE_NAME}-base (${KERNEL_PACKAGE_NAME}-image) replaces original key RDEPENDS_kernel-base ().
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
We can't just override KERNEL_IMAGETYPE in machine-specific conf files without
breaking the implementation of RPI_USE_U_BOOT. Instead we need to define a new
KERNEL_IMAGETYPE_DIRECT variable which will control the value when u-boot is not
in use. This new variable may then be overridden as needed without breaking our
u-boot support.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
