Add a dedicated machine configuration for the Raspberry Pi Compute
Module 5 IO Board. Although it is closely aligned with Raspberry Pi
5, several peripherals differ. Providing a separate configuration
will enable targeted support and feature implementation for those
distinct peripherals.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add vc4-kms-dsi-ili9881-5inch.dtbo to RPI_KERNEL_DEVICETREE_OVERLAYS
for the 5" version of Raspberry Pi Touch Display 2.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add rpi-backlight.dtbo to RPI_KERNEL_DEVICETREE_OVERLAYS. This is
a devicetree overlay for mailbox-driven Raspberry Pi DSI Display
backlight controller.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add w1-gpio-pi5.dtbo to RPI_KERNEL_DEVICETREE_OVERLAYS to resolve
the following issue noticed in vclog --msg on Raspberry Pi 5 when
ENABLE_W1 is set to 1:
dtdebug: mapped overlay 'w1-gpio' to 'w1-gpio-pi5'
dtdebug: Failed to open overlay file 'overlays/w1-gpio-pi5.dtbo'
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This reverts commit 8c916b683de8ca969b136524f03d2574af282bac.
Change like this doesn't belong to stable branch, people who
want to use 6.12 can easily switch the P_V in their config.
As reported in:
https://github.com/agherzan/meta-raspberrypi/pull/1483
lttng-modules version in scarthgap fails to build with 6.12:
lttng-modules/2.13.12/lttng-modules-2.13.12/src/../include/wrapper/uprobes.h:28:16: error: too few arguments to function 'uprobe_register'
lttng-modules-2.13.12/src/../include/wrapper/uprobes.h:34:9: error: implicit declaration of function 'uprobe_unregister'; did you mean 'uprobe_register'? [-Werror=implicit-function-declaration]
34 | uprobe_unregister(inode, offset, uc);
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Martin Jansa <martin2.jansa@lgepartner.com>
Add vc4-kms-dsi-ili9881-7inch.dtbo for the Raspberry Pi Touch
Display 2 to RPI_KERNEL_DEVICETREE_OVERLAYS.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Having RPI_KERNEL_DEVICETREE_OVERLAYS:append = " overlays/bcm2712d0.dtbo"
in raspberrypi5.conf is not applying when building an 64bit compatible image
with raspberrypi-armv8. Thus moving into the rpi-base.inc
This fix the boot of this image on Raspberry Pi 5 hw rev 1.1
Signed-off-by: Thomas Roos <throos@amazon.de>
We need the uart dts overlays to enable a specific uart peripheral.
For example if you use the disable-bt overlay, you have to enable
the uart0 dts overlay to be able to use uart0 peripheral.
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
All bcm2712 are built for arm64 builds alone and rpi-base.inc is included
by 32-bit machine configs as well. Recently, kernel moved thesr dts files
into arch/arm64/boot/dts/broadcom/ folder [1]
[1] 10c77e119e
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Similar to raspberrypi4-64.conf, we need to set KERNEL_IMAGETYPE_UBOOT to
"Image" and set KERNEL_BOOTCMD to "booti"
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Add lts-u-boot-mixin to LAYERRECOMMENDS
https://git.yoctoproject.org/meta-lts-mixins 'scarthgap/u-boot' branch
adds u-boot v2024.04 support which includes the initial support for
raspberrypi5.
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
There is anoter hifiberry hat, for which there is currently
no overlay added to the build, so let's add it:
hifiberry-dacplusadcpro.dtbo
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
"zImage" not supported on arm64 so set KERNEL_IMAGETYPE_DIRECT to
"Image" for Raspberry Pi 5 and avoid the following errors:
| make: *** No rule to make target 'zImage'. Stop.
| ERROR: oe_runmake failed
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Set SERIAL_CONSOLES to ttyAMA10. This fixes login on the UART
no matter if systemd is used.
This work was sponsored by GOVCERT.LU.
Suggested-by: Gael PORTAY <gael.portay@rtone.fr>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Set SDIMG_KERNELIMAGE to kernel_2712.img instead of kernel8.img.
Raspberry Pi 5 firmware defaults to loading kernel_2712.img because
this image contains optimisations specific to Raspberry Pi 5
(e.g. 16K page-size). For more details:
https://www.raspberrypi.com/documentation/computers/config_txt.html#kernel
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add overlays/vc4-kms-v3d-pi5.dtbo to use vc4-kms-v3d driver on
Raspberry Pi 5.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This fix is needed to bring the complete dependency chain in order to guarantee
the recursive runtime dependencies [1] of do_populate_lic_deploy in do_populate_lic
will run as expected.
[1] openembedded-core/meta/classes-recipe/license_image.bbclass:do_populate_lic_deploy[recrdeptask] += "do_populate_lic do_deploy"
Fix the following image build issues:
| ERROR: lmp-base-console-image-1.0-r0 do_populate_lic_deploy: Couldn't find license information for dependency rpi-config
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
wic images depend on the kernel device trees, and therefore should
depend on virtual/kernel:do_deploy to make sure these are present in the
deploy directory.
Most of the time, this dependency is satisfied indirectly since a rootfs
image will depend on the kernel, but add it explicitly for the cases
where it is not.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
It can be useful to disable the WiFi for hardening reasons.
And it probably lower the power consumption a bit.
Signed-off-by: Jan Vermaete <jan.vermaete@gmail.com>
Prepending new definitions should be preferred to assignment, as it is
simpler and more conducive to defining new machine configurations that
reuse these configurations.
Signed-off-by: Zachary T Welch <zach@aquabyte.ai>
ERROR: Multiple .bb files are due to be built which each provide
libav/libpostproc:
/../../meta-raspberrypi/recipes-multimedia/rpidistro-ffmpeg/rpidistro-ffmpeg_4.3.4.bb
/../../openembedded-core/meta/recipes-multimedia/ffmpeg/ffmpeg_5.1.2.bb
Ensures bitbake understands which recipe to select first.
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
* it matches the default from tune-cortexa72.inc:
$ grep DEFAULTTUNE openembedded-core/meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc
DEFAULTTUNE ?= "cortexa72"
* the assignment was introduced in:
cd234925fa
to switch to cortexa72-crc, but this change was effectively reverted in:
42ef0f5046
by setting it back to default "cortexa72".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This patch is based on an analog patch from Christopher Boyd <xpboyd@gmail.com> committed at meta-freescale.
(see 954d7a7d7a)
Signed-off-by: Oliver Lang <quantenkeks@gmail.com>
The new raspberrypi-armv8.conf aims at supporting all the ARMv8
Raspberry Pi boards.
This initial support was tested on:
* Raspberry Pi 4 Model B
* Raspberry Pi 3 Model B
* Raspberry Pi 0 2 WiFi
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
The new raspberrypi-armv7.conf aims at supporting all the ARMv7
Raspberry Pi boards.
This initial support was tested on:
* Raspberry Pi 4 Model B
* Raspberry Pi 3 Model B
* Raspberry Pi 0 2 WiFi
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
The kernel image deployment is now defined in IMAGE_BOOT_FILES as a
separate variable: RPI_EXTRA_IMAGE_BOOT_FILES. This allows a custom
kernel image deployment by redefining this variable when needed.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
All 32-bit machines are sharing the list of machine dtbs with the
exception of raspberrypi0-2w. Move this away too to unify the
machine configurations.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
Adds ability to select rpidistro version of vlc and ffmpeg over oe-core version.
via the PREFERRED_PROVIDER_vlc & PREFERRED_PROVIDER_ffmpeg
variables.
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
