It is already applied on upstream, see u-boot rev,
564d99d0723e338792df6897dc7407df2cf6196d
Fixes:
ERROR: u-boot-1_2025.07-r0 do_patch: Applying patch '0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch' on target directory '/workspaces/ls/linux-distro/build-ls-rpi4/tmp/work/ls_rpi4-limonsoftware-linux/u-boot/2025.07/sources/u-boot-2025.07'
CmdError('quilt --quiltrc /workspaces/ls/linux-distro/build-ls-rpi4/tmp/work/ls_rpi4-limonsoftware-linux/u-boot/2025.07/recipe-sysroot-native/etc/quiltrc push', 0, 'stdout: Applying patch 0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch
patching file board/raspberrypi/rpi/rpi.c
Hunk #1 FAILED at 318.
1 out of 1 hunk FAILED -- rejects in file board/raspberrypi/rpi/rpi.c
patch unexpectedly ends in middle of line
Patch 0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch can be reverse-applied
Signed-off-by: Anibal Limon <anibal@limonsoftware.com>
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Increase CONFIG_SYS_BOOTM_LEN for machine raspberrypi4 (32-bit)
because the kernel size has increased. This fixes the following
issue when booting an image with U-Boot:
Image Name: Linux-6.6.63-v7l
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 8559752 Bytes = 8.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Booting using the fdt blob at 0x2eff2000
Working FDT set to 2eff2000
Loading Kernel Image to 8000
Image too large: increase CONFIG_SYS_BOOTM_LEN
Must RESET board to recover
Fixes: https://github.com/agherzan/meta-raspberrypi/issues/1306
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
UNPACKDIR is new contruct for do_unpack things in latest master
we should be using that instead of WORKDIR for referencing those
files
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Temporary avoid Raspberry Pi 5 machines because U-Boot has not been
ported to it yet.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This patch had been merged into u-boot upstream. Its commit is
29f7d05a347a("dm: core: Move ofdata_to_platdata() call earlier").
So, remove the randundant patch to avoid building error.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
This is the result of automated script conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
The u-boot-env is provided by u-boot recipe and not by libubootenv, so
right recipe to append is the u-boot.
Adding the rpi-u-boot-scr in DEPENDS variable is wrong because it is
forcing rpi-u-boot-scr to be a dependency, but it'll fail if I have
another recipe that provides bootscript, once both recipes provide the
same file. The default value of u-boot-default-script is rpi-u-boot-scr,
so right way is to use u-boot-default-script and change the
PREFERRED_PROVIDER_u-boot-default-script if needed.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Add u-boot-default-script to the PROVIDES variable to make easier to
replace boot script in another layer just by changing
PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as
the default provider for meta-raspberrypi.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
[Issue #239] -- https://github.com/agherzan/meta-raspberrypi/issues/239
The patch 0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch has been
applied to the upstream U-Boot repo and is now in the release that
openembedded-core uses so remove it from meta-raspberrypi's U-Boot
bbappend.
Signed-off-by: Jonathan Haigh <jonathan.haigh@arm.com>
RDEPENDS is fairly meaningless for recipes which don't create a package to be
installed into the rootfs. Instead we should be using DEPENDS to guarantee
correct ordering of build tasks.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Recently removed by:
a50e19695f2cc655ef6248b77c8244519dbb468c u-boot: drop upstreamed patches in v2018.01
however this change missed the cutoff for v2018.01
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Added patch status information in patch header, and re-word of commit
message
Signed-off-by: Mirza Krak <mirza.krak@endian.se>
oe-core now provides v2017.09 of u-boot which already merged both patches
introduced by commit 94e2929f746f7e49a7870f7ea889dcbed05296c7 so we can
drop them from meta-raspberrypi.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
u-boot v2017.07 was not able to boot a Linux kernel or handle keyboard input.
This is fixed by reverting a config change to re-enable CONFIG_OF_EMBED and
backporting another config change to enable CONFIG_DM_KEYBOARD.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The patch 0003-Include-lowlevel_init.o-for-rpi2.patch does not apply on
2016.11 and causes an build error.
Patch 0002-rpi-passthrough-of-the-firmware-provided-FDT-blob.patch
provides the inclusion of lowlever_init.o.
Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
A patch is backported to check if the firmware loaded a device tree blob
into memory and set the fdt_addr variable if it is found. The U-Boot
script will then read the command line arguments generated by the
firmware from the device tree and boot the kernel with the command
line arguments and the loaded device tree.
This allows things like MAC address, board revision and serial number
to be correctly configured and options in config.txt to be used.
An additional patch is backported and further changes are made to support
this.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
The += operator should not be used in combination with overrides as it
will clear any existing values in the variable.
Example:
FOO = "bar"
FOO_rpi += "baz"
The above example would result in FOO being equal to " baz" instead of
"bar baz".
The bbappend is changed to use a wildcard instead of a specific version
to simplify updating U-Boot.
Signed-off-by: Jonathan Liu <net147@gmail.com>
