mirror of
git://git.yoctoproject.org/meta-raspberrypi
synced 2026-09-30 15:02:02 +00:00
9381de8f91
After a review in upstream, some of the patches were modified. Most notable changes: 1. use directly the dtb passed by the firmware and make sure uboot doesn't tweak memory/reg 2. remove known unimplemented support (usb, eth etc.) 3. drop patches that are not needed anymore with the new firmware update (for example 0012-bcm283x-mbox-Correctly-wait-for-space-to-send.patch) Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
109 lines
3.5 KiB
Diff
109 lines
3.5 KiB
Diff
From c03f551cab8fe38de8f0e1781f0e2e339419b003 Mon Sep 17 00:00:00 2001
|
|
From: Andrei Gherzan <andrei@balena.io>
|
|
Date: Wed, 17 Jul 2019 15:33:01 +0100
|
|
Subject: [PATCH 3/7] arm: mach-bcm283x: Define configs for RaspberryPi 4
|
|
|
|
Define two target configs for Raspberry Pi 4 (32 and 64bit) and the
|
|
corresponding BCM2838* configs.
|
|
|
|
Be aware of the current limitation in firmware which requires an
|
|
explicit configuration to force the arm in 64bit mode when the
|
|
respective target is used.
|
|
|
|
Signed-off-by: Andrei Gherzan <andrei@balena.io>
|
|
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
|
|
Upstream-status: Pending
|
|
---
|
|
arch/arm/mach-bcm283x/Kconfig | 62 +++++++++++++++++++++++++++++++++++
|
|
1 file changed, 62 insertions(+)
|
|
|
|
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
|
|
index 8e69914a83..09a5b42bbb 100644
|
|
--- a/arch/arm/mach-bcm283x/Kconfig
|
|
+++ b/arch/arm/mach-bcm283x/Kconfig
|
|
@@ -26,6 +26,23 @@ config BCM2837_64B
|
|
select BCM2837
|
|
select ARM64
|
|
|
|
+config BCM2838
|
|
+ bool "Broadcom BCM2838 SoC support"
|
|
+ depends on ARCH_BCM283X
|
|
+
|
|
+config BCM2838_32B
|
|
+ bool "Broadcom BCM2838 SoC 32-bit support"
|
|
+ depends on ARCH_BCM283X
|
|
+ select BCM2838
|
|
+ select ARMV7_LPAE
|
|
+ select CPU_V7A
|
|
+
|
|
+config BCM2838_64B
|
|
+ bool "Broadcom BCM2838 SoC 64-bit support"
|
|
+ depends on ARCH_BCM283X
|
|
+ select BCM2838
|
|
+ select ARM64
|
|
+
|
|
menu "Broadcom BCM283X family"
|
|
depends on ARCH_BCM283X
|
|
|
|
@@ -127,6 +144,50 @@ config TARGET_RPI_3
|
|
This option creates a build targeting the ARMv8/AArch64 ISA.
|
|
select BCM2837_64B
|
|
|
|
+config TARGET_RPI_4_32B
|
|
+ bool "Raspberry Pi 4 32-bit build"
|
|
+ help
|
|
+ Support for all BCM2838-based Raspberry Pi variants, such as
|
|
+ the RPi 4 model B, in AArch32 (32-bit) mode.
|
|
+
|
|
+ This option assumes the VideoCore firmware is configured to use the
|
|
+ mini UART (rather than PL011) for the serial console. This is the
|
|
+ default on the RPi 4. To enable the UART console, the following non-
|
|
+ default option must be present in config.txt: enable_uart=1. This is
|
|
+ required for U-Boot to operate correctly, even if you only care
|
|
+ about the HDMI/usbkbd console.
|
|
+
|
|
+ Due to hardware incompatibilities, this can't be used with
|
|
+ BCM283/5/6/7.
|
|
+
|
|
+ This option creates a build targeting the ARMv7/AArch32 ISA.
|
|
+ select BCM2838_32B
|
|
+
|
|
+config TARGET_RPI_4
|
|
+ bool "Raspberry Pi 4 64-bit build"
|
|
+ help
|
|
+ Support for all BCM2838-based Raspberry Pi variants, such as
|
|
+ the RPi 4 model B, in AArch64 (64-bit) mode.
|
|
+
|
|
+ This option assumes the VideoCore firmware is configured to use the
|
|
+ mini UART (rather than PL011) for the serial console. This is the
|
|
+ default on the RPi 4. To enable the UART console, the following non-
|
|
+ default option must be present in config.txt: enable_uart=1. This is
|
|
+ required for U-Boot to operate correctly, even if you only care
|
|
+ about the HDMI/usbkbd console.
|
|
+
|
|
+ Due to hardware incompatibilities, this can't be used with
|
|
+ BCM283/5/6/7.
|
|
+
|
|
+ Also, due to a bug in firmware, switching to 64bit mode doesn't
|
|
+ happen automatically based on the kernel's image filename. See
|
|
+ https://github.com/raspberrypi/firmware/issues/1193 for more details.
|
|
+ Until that is resolved, the configuration (config.txt) needs to
|
|
+ explicitly set: arm_64bit=1.
|
|
+
|
|
+ This option creates a build targeting the ARMv8/AArch64 ISA.
|
|
+ select BCM2838_64B
|
|
+
|
|
endchoice
|
|
|
|
config SYS_BOARD
|
|
@@ -145,5 +206,6 @@ config BCM283x_BASE
|
|
hex
|
|
default "0x20000000" if BCM2835
|
|
default "0x3f000000" if BCM2836 || BCM2837
|
|
+ default "0xfe000000" if BCM2838
|
|
|
|
endmenu
|
|
--
|
|
2.22.0
|
|
|