mirror of
git://git.yoctoproject.org/meta-raspberrypi
synced 2026-09-26 01:27:59 +00:00
c2cbafe78f
Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board). Signed-off-by: Jakub Luzny <jakub@luzny.cz>
241 lines
11 KiB
BlitzBasic
241 lines
11 KiB
BlitzBasic
DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
|
|
The Raspberry Pi config.txt file is read by the GPU before \
|
|
the ARM core is initialised. It can be used to set various \
|
|
system configuration parameters."
|
|
LICENSE = "MIT"
|
|
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
|
|
|
|
COMPATIBLE_MACHINE = "^rpi$"
|
|
|
|
SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f"
|
|
SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
|
|
"
|
|
|
|
S = "${WORKDIR}/git"
|
|
|
|
PR = "r5"
|
|
|
|
INHIBIT_DEFAULT_DEPS = "1"
|
|
|
|
PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
|
|
PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
|
|
PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
|
|
PITFT28c="${@bb.utils.contains("MACHINE_FEATURES", "pitft28c", "1", "0", d)}"
|
|
PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
|
|
|
|
VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
|
|
VC4DTBO ?= "vc4-kms-v3d"
|
|
GPIO_IR ?= "18"
|
|
GPIO_IR_TX ?= "17"
|
|
|
|
CAN_OSCILLATOR ?= "16000000"
|
|
|
|
inherit deploy nopackages
|
|
|
|
do_deploy() {
|
|
install -d ${DEPLOYDIR}/bcm2835-bootfiles
|
|
|
|
cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/
|
|
|
|
if [ -n "${KEY_DECODE_MPG2}" ]; then
|
|
sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${KEY_DECODE_WVC1}" ]; then
|
|
sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${DISABLE_OVERSCAN}" ]; then
|
|
sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ "${DISABLE_SPLASH}" = "1" ]; then
|
|
sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Set overclocking options
|
|
if [ -n "${ARM_FREQ}" ]; then
|
|
sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${GPU_FREQ}" ]; then
|
|
sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${CORE_FREQ}" ]; then
|
|
sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${SDRAM_FREQ}" ]; then
|
|
sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${OVER_VOLTAGE}" ]; then
|
|
sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# GPU memory
|
|
if [ -n "${GPU_MEM}" ]; then
|
|
sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${GPU_MEM_256}" ]; then
|
|
sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${GPU_MEM_512}" ]; then
|
|
sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${GPU_MEM_1024}" ]; then
|
|
sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Set boot delay
|
|
if [ -n "${BOOT_DELAY}" ]; then
|
|
sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${BOOT_DELAY_MS}" ]; then
|
|
sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Set HDMI and composite video options
|
|
if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then
|
|
sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${HDMI_DRIVE}" ]; then
|
|
sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${HDMI_GROUP}" ]; then
|
|
sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${HDMI_MODE}" ]; then
|
|
sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${CONFIG_HDMI_BOOST}" ]; then
|
|
sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${SDTV_MODE}" ]; then
|
|
sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${SDTV_ASPECT}" ]; then
|
|
sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ -n "${DISPLAY_ROTATE}" ]; then
|
|
sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Video camera support
|
|
if [ "${VIDEO_CAMERA}" = "1" ]; then
|
|
echo "# Enable video camera" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "start_x=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Offline compositing support
|
|
if [ "${DISPMANX_OFFLINE}" = "1" ]; then
|
|
echo "# Enable offline compositing" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dispmanx_offline=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# SPI bus support
|
|
if [ "${ENABLE_SPI_BUS}" = "1" ] || [ "${PITFT}" = "1" ]; then
|
|
echo "# Enable SPI bus" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# I2C support
|
|
if [ "${ENABLE_I2C}" = "1" ] || [ "${PITFT}" = "1" ]; then
|
|
echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtparam=i2c_arm=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# PiTFT22 display support
|
|
if [ "${PITFT22}" = "1" ]; then
|
|
echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ "${PITFT28r}" = "1" ]; then
|
|
echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ "${PITFT28c}" = "1" ]; then
|
|
echo "# Enable PITFT28c display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=pitft28-capacitive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=pitft28-capacitive,touch-swapxy,touch-invx" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
if [ "${PITFT35r}" = "1" ]; then
|
|
echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# UART support
|
|
if [ "${ENABLE_UART}" = "1" ]; then
|
|
echo "# Enable UART" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "enable_uart=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Infrared support
|
|
if [ "${ENABLE_IR}" = "1" ]; then
|
|
echo "# Enable infrared" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=gpio-ir,gpio_pin=${GPIO_IR}" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=gpio-ir-tx,gpio_pin=${GPIO_IR_TX}" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# VC4 Graphics support
|
|
if [ "${VC4GRAPHICS}" = "1" ]; then
|
|
echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=${VC4DTBO}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm)
|
|
if [ "${WAVESHARE_1024X600_C_2_1}" = "1" ]; then
|
|
echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "max_usb_current=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "hdmi_group=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "hdmi_mode=87" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# DWC2 USB peripheral support
|
|
if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then
|
|
echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# AT86RF23X support
|
|
if [ "${ENABLE_AT86RF}" = "1" ]; then
|
|
echo "# Enable AT86RF23X" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=at86rf233,speed=3000000" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# ENABLE DUAL CAN
|
|
if [ "${ENABLE_DUAL_CAN}" = "1" ]; then
|
|
echo "# Enable DUAL CAN" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=mcp2515-can1,oscillator=${CAN_OSCILLATOR},interrupt=24" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
# ENABLE CAN
|
|
elif [ "${ENABLE_CAN}" = "1" ]; then
|
|
echo "# Enable CAN" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
fi
|
|
|
|
# Append extra config if the user has provided any
|
|
printf "${RPI_EXTRA_CONFIG}\n" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
|
|
# Handle setup with armstub file
|
|
if [ "${@bb.utils.contains("MACHINE_FEATURES", "armstub", "1", "0", d)}" = "1" ]; then
|
|
echo "\n# ARM stub configuration" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "armstub=${ARMSTUB}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
case "${ARMSTUB}" in
|
|
*-gic.bin)
|
|
echo "enable_gic=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
;;
|
|
esac
|
|
fi
|
|
}
|
|
|
|
do_deploy_append_raspberrypi3-64() {
|
|
echo "# have a properly sized image" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "disable_overscan=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
|
|
echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
|
|
}
|
|
|
|
addtask deploy before do_build after do_install
|
|
do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
|
|
|
|
PACKAGE_ARCH = "${MACHINE_ARCH}"
|