mirror of
git://git.yoctoproject.org/poky
synced 2026-04-02 02:49:11 +00:00
34f0052af3
u-boot 2025.10rc2 based firmware from meta-ts https://gitlab.com/Linaro/trustedsubstrate/meta-ts triggers some non-fatal errors from various drivers. Ignore them for now since all other oeqa runtime tests pass since in genericarm64 we don't build this firmware. (From meta-yocto rev: fe65e142d0d9ba0e51ff9175ffa82e902f982a20) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
61 lines
2.4 KiB
Plaintext
61 lines
2.4 KiB
Plaintext
# AMD KV260 with u-boot 2025.10rc2 based firmware
|
|
# safe to ignore minor firmware issue
|
|
zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin
|
|
zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: set mux failed for pin
|
|
request failed for node
|
|
error -EACCES: failed to add to PM domain domain
|
|
probe with driver sdhci-arasan failed with error
|
|
Error applying setting, reverse things back
|
|
# safe to ignore initrd warning
|
|
Can't lookup blockdev
|
|
# X11 fails to start without connected display
|
|
modeset(0): failed to set mode: Invalid argument
|
|
|
|
# Rockpi4b with u-boot 2025.10rc2 based firmware
|
|
memory-controller: probe with driver rk3399-dmc-freq failed with error
|
|
probe with driver rockchip-pcie failed with error
|
|
platform hdmi-sound: deferred probe pending: asoc-simple-card: parse error
|
|
deferred probe pending: rockchip-spi: Failed to request optional TX DMA channel
|
|
platform sound: deferred probe pending: asoc-audio-graph-card: parse error
|
|
platform sound-dit: deferred probe pending: asoc-audio-graph-card: parse error
|
|
|
|
# AMD zcu102 with u-boot 2025.10rc2 based firmware
|
|
# optee not available on all devices
|
|
optee firmware:optee: probe with driver optee failed with error
|
|
# SPI device probe error
|
|
spi_master spi0: Failed to create SPI device for
|
|
# PHY clock not correct
|
|
deferred probe pending: xilinx-psgtr: Failed to get ref clock
|
|
|
|
# TI k3 am62p5-sk with u-boot 2024.04-ti
|
|
# small issue in devicetree
|
|
OPP table can't be empty
|
|
|
|
# NXP imx8mp verdin with u-boot 2025.10rc2
|
|
# RTC detection issue
|
|
oscillator failed, set time!
|
|
# uart issue
|
|
serial: failed to get ipg clk
|
|
# GPIO driver/dt issue
|
|
failed writing register: -6
|
|
# Audio codec issue
|
|
nau8822 3-001a: Failed to issue reset
|
|
# Audio devicetree issue
|
|
platform sound: deferred probe pending: asoc-simple-card: parse error
|
|
|
|
# Broadcom Rpi4 with u-boot 2025.10rc2
|
|
# wifi firmware issue
|
|
Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed
|
|
|
|
# Qualcomm rb3gen2 with u-boot 2025.10rc2 based firmware
|
|
# PMIC issue
|
|
qcom_pmic_glink pmic-glink: Failed to create device link
|
|
# i2c issue
|
|
geni_i2c 980000.i2c: error -ENXIO: Invalid proto
|
|
geni_i2c 984000.i2c: error -ENXIO: Invalid proto
|
|
# wifi issues
|
|
ath11k 17a10040.wifi: failed to get rproc:
|
|
# drm issue
|
|
auxiliary aux_bridge.aux_bridge.0: deferred probe pending: aux_bridge.aux_bridge: failed to acquire drm_bridge
|
|
auxiliary pmic_glink.altmode.0: deferred probe pending: pmic_glink_altmode.pmic_glink_altmode: failed to acquire retimer-switch for port
|