conf/layer.conf

@@ -1,18 +0,0 @@
-# We have a conf and classes directory, add to BBPATH
-BBPATH .= ":${LAYERDIR}"
-
-# We have recipes-* directories, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
-			${LAYERDIR}/recipes-*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "pinecube-bsp"
-BBFILE_PATTERN_pinecube-bsp = "^${LAYERDIR}/"
-BBFILE_PRIORITY_pinecube-bsp = "6"
-
-# This should only be incremented on significant changes that will
-# cause compatibility issues with other layers
-LAYERVERSION_pinecube-bsp = "2"
-
-
-LAYERDEPENDS_pinecube-bsp = "core sunxi-bsp"
-LAYERSERIES_COMPAT_pinecube-bsp = "scarthgap"

conf/machine/pinecube.conf

@@ -1,41 +0,0 @@
-# Pinecube
-#
-# Sochip S3 SoC
-# ARMv7 Processor rev 5 (v7l)
-# Allwinner sun8i Family
-# half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
-#
-# There apparently is some support for the device in mainline kernel,
-# let's see how far can we take it.
-
-# Helium specific
-MACHINE_FRIENDLY_NAME = "Pinecube"
-MACHINE_NUM_CORES = "1"
-
-# Architecture tuning
-require conf/machine/include/sun8i.inc
-require conf/machine/include/arm/feature-arm-dsp.inc
-require conf/machine/include/arm/feature-arm-idiv.inc
-
-# Available machine features
-MACHINE_FEATURES = "ext2 rtc serial usbhost vfat wifi"
-
-# Kernel and device tree
-PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
-PREFERRED_VERSION_virtual/kernel = "6.6%"
-KERNEL_DEVICETREE = "allwinner/sun8i-s3-pinecube.dtb"
-MACHINE_EXTRA_RRECOMMENDS = "kernel-modules kernel-devicetree"
-
-# Serial console
-SERIAL_CONSOLES ?= "115200;ttyS0"
-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
-
-# Bootloader
-UBOOT_MACHINE = "pinecube_defconfig"
-
-# wic SD card image
-IMAGE_FSTYPES += " wic"
-WKS_FILE = "pinecube.wks"
-do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot virtual/bootloader:do_deploy"
-IMAGE_BOOT_FILES ?= "${SPL_BINARY} boot.scr ${KERNEL_IMAGETYPE} ${KERNEL_DEVICETREE}"
-MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-image kernel-devicetree"

recipes-bsp/u-boot/u-boot-script/boot.cmd

@@ -1,65 +0,0 @@
-# Pinecube u-boot script
-# Adapted from Armbian
-
-echo "[+] Helium u-boot script for Pinecube"
-echo "[+] Congratulations! Boot ROM has found and started the bootloader."
-
-# Setup
-setenv load_addr "0x45000000"
-setenv overlay_error "false"
-
-# Default options
-setenv verbosity "7"
-setenv console "on"
-setenv disp_mem_reserves "off"
-setenv docker_optimizations "on"
-setenv earlycon "on"
-
-# Deault rootfs
-setenv devnum "0"
-setenv rootdev "/dev/mmcblk${devnum}p1"
-setenv rootfstype "ext4"
-
-# Print boot source
-itest.b *0x28 == 0x00 && setenv boot_source "Primary SD card"
-itest.b *0x28 == 0x02 && setenv boot_source "eMMC/Secondary SD card"
-itest.b *0x28 == 0x03 && setenv boot_source "SPI ROM"
-echo "[+] Boot source: ${boot_source}"
-
-# Set up boot device info
-if test "${devtype}" = "mmc"; then
-  part uuid mmc ${devnum}:1 partuuid;
-  setenv devnum ${mmc_bootdev}
-  setenv rootdev "/dev/mmcblk${mmc_bootdev}p1"
-fi
-echo "[+] Boot script loaded from ${devtype}:${devnum}"
-
-# Load boot configuration
-if test -e ${devtype} ${devnum} ${prefix}boot.cfg; then
-	load ${devtype} ${devnum} ${load_addr} ${prefix}boot.cfg
-	env import -t ${load_addr} ${filesize}
-	echo "[+] Loaded boot configuration: ${devtype}:${devnum}:${prefix}boot.cfg" 
-else
-	echo "[-] No boot configuration found, running defaults"
-fi
-
-# Apply boot configuration
-if test "${console}" = "on"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
-if test "${earlyconsole}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-
-setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} ubootsource=${devtype} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
-
-if test "${disp_mem_reserves}" = "off"; then setenv bootargs "${bootargs} sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16"; fi
-if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
-
-# Load boot files
-echo "[+] Loading kernel image ${devtype}:${devnum}:${prefix}zImage @ ${kernel_addr_r}"
-load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
-echo "[+] Loading device tree ${devtype}:${devnum}:${prefix}${fdtfile} @ ${fdt_addr_r}"
-load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}${fdtfile}
-fdt addr ${fdt_addr_r}
-fdt resize 65536
-
-echo "[+] Setup finished, booting..."
-# We're booting without initramfs
-bootz ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-script_1.0.bb

@@ -1,37 +0,0 @@
-SUMMARY = "Boot script for u-boot"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
-
-COMPATIBLE_MACHINE = "pinecube"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-DEPENDS = "u-boot-mkimage-native"
-
-inherit deploy
-
-SRC_URI += "file://boot.cmd"
-FILES:${PN} += "/boot"
-
-do_mkimage () {
-	uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
-				  -n "${DISTRO}-${MACHINE} u-boot script" \
-				  -d ${THISDIR}/${PN}/boot.cmd ${B}/boot.scr
-}
-
-addtask mkimage after do_compile before do_install
-
-do_compile[noexec] = "1"
-
-do_install () {
-	install -D -m 644 ${B}/boot.scr ${D}/boot/boot.scr
-}
-
-do_deploy () {
-	install -D -m 644 ${D}/boot/boot.scr ${DEPLOYDIR}/boot.scr-${MACHINE}-${PV}-${PR}
-
-	cd ${DEPLOYDIR}
-	rm -f boot.scr
-	ln -sf boot.scr-${MACHINE}-${PV}-${PR} boot.scr
-}
-
-addtask deploy after do_install before do_build

recipes-core/images/pinecube-image-default.bb

@@ -1,12 +0,0 @@
-SUMMARY = "Base image for Pinecube"
-LICENSE = "MIT"
-
-#MACHINE := "pinecube"
-COMPATIBLE_MACHINE = "pinecube"
-
-IMAGE_INSTALL += " \
-	u-boot-script \
- 	kernel-module-8189es \
-"
-
-IMAGE_FEATURES += "hwcodecs"

recipes-kernel/kernel-modules/kernel-module-8189es_git.bb

@@ -1,21 +0,0 @@
-SUMMARY = "Realtek RTL8189ES wireless driver module"
-# TODO: The repo doesn't specify a license, however source files suggest GPLv2
-LICENSE = "CLOSED"
-
-SRC_URI = "git://github.com/jwrdegoede/rtl8189ES_linux.git;protocol=https;branch=master"
-SRCREV = "05996691a5f3a61968a83f8b368454fd2c6885ca"
-
-S = "${WORKDIR}/git"
-PV = "git${SRCREV}"
-
-DEPENDS = "virtual/kernel"
-
-inherit module
-
-EXTRA_OEMAKE  = "ARCH=${ARCH}"
-EXTRA_OEMAKE += "KSRC=${STAGING_KERNEL_BUILDDIR}"
-
-do_install() {
-    install -d ${D}lib/modules/${KERNEL_VERSION}
-    install -m 0755 ${B}/8189es.ko ${D}lib/modules/${KERNEL_VERSION}/8192eu.ko
-}

recipes-kernel/linux/linux-yocto/0001-pinecube-dts-fix-ir-leds.patch

@@ -1,18 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -25,12 +25,12 @@ leds {
- 
- 		led1 {
- 			label = "pine64:ir:led1";
--			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
-+			gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
- 		};
- 
- 		led2 {
- 			label = "pine64:ir:led2";
--			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
-+			gpios = <&pio 1 12 GPIO_ACTIVE_HIGH>; /* PB12 */
- 		};
- 	};
- 

recipes-kernel/linux/linux-yocto/0002-pinecube-dts-battery.patch

@@ -1,14 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -162,6 +162,10 @@ &ac_power_supply {
- 	status = "okay";
- };
- 
-+&battery_power_supply {
-+	status = "okay";
-+};
-+
- &reg_dcdc2 {
- 	regulator-always-on;
- 	regulator-min-microvolt = <1250000>;

recipes-kernel/linux/linux-yocto/0003-pinecube-dts-flash-xtx.patch

@@ -1,12 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -207,7 +207,7 @@ &spi0 {
- 	flash@0 {
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		compatible = "winbond,w25q128", "jedec,spi-nor";
-+		compatible = "xtx,xt25f128b", "jedec,spi-nor";
- 		reg = <0>;
- 		spi-max-frequency = <40000000>;
- 	};

recipes-kernel/linux/linux-yocto/0004-pinecube-dts-usb.patch

@@ -1,34 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -75,6 +75,18 @@ csi1_ep: endpoint {
- 	};
- };
- 
-+&ehci0 {
-+	phys = <&usbphy 0>;
-+	phy-names = "usb";
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	phys = <&usbphy 0>;
-+	phy-names = "usb";
-+	status = "okay";
-+};
-+
- &emac {
- 	phy-handle = <&int_mii_phy>;
- 	phy-mode = "mii";
-@@ -217,11 +229,6 @@ &uart2 {
- 	status = "okay";
- };
- 
--&usb_otg {
--	dr_mode = "host";
--	status = "okay";
--};
--
- &usbphy {
- 	usb0_vbus-supply = <&reg_vcc5v0>;
- 	status = "okay";

recipes-kernel/linux/linux-yocto/0005-pinecube-dts-csi.patch

@@ -1,12 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -64,6 +64,8 @@ &csi1 {
- 	status = "okay";
- 
- 	port {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
- 		csi1_ep: endpoint {
- 			remote-endpoint = <&ov5640_ep>;
- 			bus-width = <8>;

recipes-kernel/linux/linux-yocto/0006-pinecube-dts-audio.patch

@@ -1,21 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -226,3 +226,16 @@ &usbphy {
- 	usb0_vbus-supply = <&reg_vcc5v0>;
- 	status = "okay";
- };
-+
-+&i2s0 {
-+	status = "okay";
-+};
-+
-+&codec {
-+	allwinner,pa-gpio = <&pio 6 6 GPIO_ACTIVE_HIGH>; /*PG6*/
-+	allwinner,audio-routing =
-+		"Speaker", "LINEOUT",
-+		"MIC1", "Mic",
-+		"Mic",  "MBIAS";
-+	status = "okay";
-+};
-+

recipes-kernel/linux/linux-yocto/0006-pinecube-dts-axp209.patch

@@ -1,19 +0,0 @@
-diff -purN a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
---- a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
-@@ -99,9 +99,13 @@ &i2c0 {
- 	status = "okay";
- 
- 	axp209: pmic@34 {
-+		compatible = "x-powers,axp203",
-+					 "x-powers,axp209";
- 		reg = <0x34>;
--		interrupt-parent = <&nmi_intc>;
--		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-parent = <&gic>;
-+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
- 	};
- };
- 

recipes-kernel/linux/linux-yocto/pinecube.cfg

@@ -1,23 +0,0 @@
-# Pinecube-specific configuration
-
-# AXP209 PMIC
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_PINCTRL_AXP209=y
-CONFIG_CHARGER_AXP20X=y
-CONFIG_BATTERY_AXP20X=y
-CONFIG_AXP20X_POWER=y
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_AXP20X_ADC=y
-
-# OV5640 over CSI
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_VIDEO_SUN6I_CSI=y
-CONFIG_VIDEO_OV5640=y
-
-# Wireless - needed for RTL8189ES driver
-CONFIG_WIRELESS=y
-CONFIG_RFKILL=y
-CONFIG_CFG80211=y

recipes-kernel/linux/linux-yocto/pinecube.scc

@@ -1,27 +0,0 @@
-define KMACHINE pinecube
-define KTYPE standard
-define KARCH arm
-
-# TODO: find a way to actually include this here instead of in bbappend
-#include sun8i.scc
-
-kconf hardware sunxi-cedrus.cfg
-kconf hardware sochip-s3.cfg
-kconf hardware pinecube.cfg
-
-# Pinecube relevant parts of original patchset from Icenowy Zheng,
-# microcai and Daniel Fullmer that didn't make it into mainline.
-# Adapted for linux-yocto 6.1.25
-patch 0001-pinecube-dts-fix-ir-leds.patch
-patch 0002-pinecube-dts-battery.patch
-patch 0003-pinecube-dts-flash-xtx.patch
-patch 0004-pinecube-dts-usb.patch
-patch 0005-pinecube-dts-csi.patch
-
-# applying axp209 patch freezes kernel on boot
-# it seems we can either have power control
-# or working kernel, but not both
-#patch 0006-pinecube-dts-axp209.patch
-
-# in case axp209 ever works, this should be 0007
-patch 0006-pinecube-dts-audio.patch

recipes-kernel/linux/linux-yocto/sochip-s3.cfg

@@ -1,9 +0,0 @@
-# Configuration for Sochip S3 SoC
-
-# Disable SMP, we have only one CPU
-CONFIG_SMP=n
-CONFIG_NR_CPUS=n
-
-# sun8i V3S specific
-CONFIG_SUN8I_V3S_CCU=y
-CONFIG_PINCTRL_SUN8I_V3S=y

recipes-kernel/linux/linux-yocto_6.6%.bbappend

@@ -1,10 +0,0 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
-
-COMPATIBLE_MACHINE:pinecube = "pinecube"
-# TODO: sun8i.scc should be included by pinecube.scc
-# but apparently yocto has a problem with including
-# scc files from other layers.
-SRC_URI += "file://sun8i.scc;type=kmeta;destsuffix=sun8i"
-SRC_URI += "file://pinecube.scc;type=kmeta;destsuffix=pinecube"
-
-LINUX_VERSION_EXTENSION = "-${DISTRO}-${MACHINE}-1"

wic/pinecube.wks

@@ -1,14 +0,0 @@
-# short-description: Helium SD card image for Pinecube
-# base: meta-sunxi-bsp/wic/sunxi.wks
-
-# Allwinner sunxi boot ROM expects to find a bootloader at 8KB offset
-# on the boot device. The bootloader should be the eGON SPL boot image,
-# eg. u-boot-sunxi. For u-boot the built image is usually named
-# u-boot-sunxi-with-spl.bin. It should be added to machine's
-# IMAGE_BOOT_FILES for wic to find it.
-
-part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --offset 8 --no-table
-
-# add your partitions and options below:
-part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label helium-root --active --align 4
-bootloader --append="console=ttyS0,115200"