Use protocols=https for GitHub SRC_URIs using the conversion script in
openembedded-core.
Signed-off-by: Marcel Hamer <marcel@solidxs.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
By default in case of CM4 IO board, the USB ports (header + built-in)
are disabled. In order to enable them the DWC2 mode needs to be set to
host.
Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
The u-boot-env is provided by u-boot recipe and not by libubootenv, so
right recipe to append is the u-boot.
Adding the rpi-u-boot-scr in DEPENDS variable is wrong because it is
forcing rpi-u-boot-scr to be a dependency, but it'll fail if I have
another recipe that provides bootscript, once both recipes provide the
same file. The default value of u-boot-default-script is rpi-u-boot-scr,
so right way is to use u-boot-default-script and change the
PREFERRED_PROVIDER_u-boot-default-script if needed.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board).
Signed-off-by: Jakub Luzny <jakub@luzny.cz>
Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay.
ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay.
This will allow a user to enable dual CAN when using a hat like the
PiCAN 2 Duo board.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
The u-boot-env is provided by u-boot recipe and not by libubootenv, so
right recipe to append is the u-boot.
Adding the rpi-u-boot-scr in DEPENDS variable is wrong because it is
forcing rpi-u-boot-scr to be a dependency, but it'll fail if I have
another recipe that provides bootscript, once both recipes provide the
same file. The default value of u-boot-default-script is rpi-u-boot-scr,
so right way is to use u-boot-default-script and change the
PREFERRED_PROVIDER_u-boot-default-script if needed.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
(cherry picked from commit fc72c061411ea78515a670b63b0d44c13451cb78)
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add fw_env.config that uses at run-time /boot/uboot.env generated
through the boot scripts (specifically boot.cmd.in) from recipe
rpi-u-boot-scr. This configuration file is required to
successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env
in the /boot partition when using U-Boot. This change is required
to successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Add u-boot-default-script to the PROVIDES variable to make easier to
replace boot script in another layer just by changing
PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as
the default provider for meta-raspberrypi.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
This RaspberryPi firmware update includes a change in the license file
as well[1]. This change is for supporting customisation program.
[1] dd9e9ebb5d
As a result of this change, we update the hash in the bcm2835-bootfiles
recipe as well.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
All source files in the armstubs directory have a 3-clause BSD license.
The Makefile doesn't appear to use any files from outside this directory
during the build.
Signed-off-by: Paul Barker <paul@betafive.co.uk>
Intuitively, bcm2835-bootfiles:do_deploy should depend on rpi-config:do_deploy.
This indirectly resolves a missing dep between rpi-config:do_deploy and
do_image_rpi_sdimg (on an image recipe inheriting from sdcard_image-rpi.bbclass).
This manifested as changes to rpi-config (e.g. setting or unsetting
ENABLE_* variables) not triggering a rebuild of the SD card image.
Signed-off-by: Chris Laplante <mostthingsweb@gmail.com>
